About Technician Salary

computer technician question?

Josh — Thu, 17 May 2012 19:00:33 +0000

curiouscoolcat Asked: computer technician question?

OK ever since I started using windows 7 my external hard drives have to power on and off literally three times before windows loads during startup. How come XP just kept the drives running during startup the only time they would shut off was when the computer would shut down completely? If you can figure out how to keep these drives from powering off so many times then your a smarter than me and I'm a PC specialist.

Answers:

Tyler Answered:
Good question, I dont know if I can give a correct answer without doing any trouble shooting.Make sure that the external drives are not first in the boot priority in the BIOS settings.

Sara Answered:
it sounds like your computer is confused. lol. trying to decide which drive to boot from.

frankg Answered:
Un check them from your start up .

Delta Answered:
I'm not quite sure what you mean. Is it that the hard drives lose power a few times during the Windows 7 boot cycle? If the drives are powered by the computer's USB connection and not powered by an external adapter, then that's just how Windows 7 rolls. It does this with all USB connected devices – if you have a keyboard with a backlight it's quite noticeable. If it's not causing any problems with the drives and they work normally after boot, then I see no reason to be concerned with it.

Got a better answer? Share it below!

Scientist – Cry Of The Werewolf

Josh — Thu, 17 May 2012 19:00:24 +0000

Scientist – Cry Of The Werewolf Scientist, born Hopeton Brown in Kingston, Jamaica, 1960 (sometimes known as Overton Brown), was a protégé of King Tubby (Osbourne Ruddock), one of the originators of dub music. Brown was introduced to electronics by his father, who worked as a television and radio repair technician.[1] He began building his own amplifiers and would buy transformers from Tubby's Dromilly Road studio, and while there would keep asking Tubby to give him a chance at mixing. He was taken on at Tubby's as an assistant, performing tasks such as winding transformer coils, and began working as a mixer in the mid-1970s, initially creating dubs of reworked Studio One riddims for Don Mais' Roots Tradition label, given his chance when Prince Jammy cut short a mixing session for Mais because he was too tired to continue.[1] The first hit record that he mixed was Barrington Levy's "Collie Weed". His name originated from a joke between Tubby and Bunny Lee. Having noticed Brown's forward thinking ideas and technical aspirations, Tubby remarked "Damn, this little boy must be a scientist."[2] He left King Tubby's studio at the end of the 1970s and became the principal engineer for Channel One Studio when hired by the Hoo Kim brothers, giving him the chance to work on a 16-track mixing desk rather than the four tracks at Tubby's.[1][3] He came to prominence in the early 1980s and produced many albums, his mixes featuring on many releases in the first part of the decade. In …

Why does my Ignis CNFT 370 fridge freezer not work properly? freezer bit seems to over-freeze all th

Josh — Wed, 16 May 2012 07:00:28 +0000

Nicola Asked: Why does my Ignis CNFT 370 fridge freezer not work properly? freezer bit seems to over-freeze all th

Freezer over-freezes a few days after defrosting (shouldn't need defrosting as it is supposed to be frost free) and when the freezer over-freezes the fridge part stops working… I live in Cyprus and it only seems to have been doing this since the weather started getting really warm… landlord said to get a technician out to it but i know the previous tenants and they had a technician out who said that it was a known fault with this model so i don't see the point in getting another one out. I think it may be because of where the fridge is kept as it is sort of in a cupboard but doesn't have a cupboard door on the front.. I have just moved it out of there to see if this will help but any other suggestions would be greatly appreciated

Answers:

Be The First To Answer This Question…

Got a better answer? Share it below!

Appliance Repair Jobs, Hyattsville, MD, 888-859-1305

Josh — Wed, 16 May 2012 07:00:19 +0000

The Appliance Repair Men is a nationwide Appliance Repair Company. We book thousands of appliance repair appointments every day and send them out to local technicians. We collect our service fee from the customer directly and then send the job out to a local technician or company. You decide if you want to accept the job or not. If you accept the job you bill the customer directly for parts and labor. We are currently looking for technicians and companies in the Hyattsville, MD metro area. Please contact us at www.info@theappliancerepairmen.com or 888-859-3105

How to become a successful IT technician?

Josh — Mon, 14 May 2012 19:00:38 +0000

Marks Asked: How to become a successful IT technician?

Hi my name is Mark and I currently study at sixth form college doing my A levels in three subjects which are media studies, film studies and physical education. I always had passion for IT at home Im often the person who fixes parents and friends computers. In most cases I can find a problem and deal with it efficiently. I also learned how to reinstall windows operating system and install fresh copy of windows on pc's, laptops and netbooks. I am really into IT technical side I have taken my old computer apart replaced certain parts I have also built my computer system not that long ago which went very successful. The reason for not taking A level in ICT because it was primarily focusing on business side of IT which I am not into. I have decided not to go to university because I couldn't find a course that wouldperfectly suit meand now I am considering an apprenticeship in IT. I have done good amount of research on apprenticeships and there are plenty out there waiting for me to apply. I have finished school with 10 GCSES which I consider as good. I am seeking for an advice from who is reading this or who is IT technician. It would be beneficial for me if you could advise me what should I do with my situation, well my only choice is to go on apprenticeship. But I really dont know where to apply because there are thousands of companies around.(im in North West part of Britain) This is my last year at college, and I want to get into apprenticeship ASAP and I had a company in mind that I was going to apply to but unfortunately the company fell apart. The company name was Zenos which was primarily focusing on IT. So what should I undertake and what apprenticeship would suit me best, Im zero at programming, Im more of a problem solver, in computer problem faults and I also have passion for building computer systems and fixing them and installing software and reinstalling operating systems. Thanks for reading.

Answers:

Be The First To Answer This Question…

Got a better answer? Share it below!

Hair Routine/Length

Josh — Mon, 14 May 2012 19:00:26 +0000

How I keep my hair long and what products I use. Products: -frederic fekkai silky straight ironless shampoo and condition OR technician color care shampoo and conditioner. i use both. -macadamia oil deep repair mask -josie maran argan oil

10 Instruments Every single Laptop or computer Repair Technician Should Maintain in His Arsenal

Josh — Thu, 10 May 2012 19:00:23 +0000

If computers are the lifeline of how the globe virtually runs within the latest times, pc fix technician(s) would be the ‘doctors’ who ensure which the lifeline is fit and operating. Considered to be 1 of essentially the most ‘high precision’ employment, pc repair takes a lot of responsibility and precision in overall performance. Listed below are several ‘must-have’ Pc restore tools any computer repair technician should maintain in his arsenal.
1. Normal Screwdrivers: (non-magnetic)
Premium-quality screwdrivers of assorted measurements and also one with numerous shaft lengths are indispensable resources in any computer fix technician’s arsenal. Screwdrivers with distinct sized flat-head are also essential; even so, ensure not to use magnetic screwdrivers within personal computers.
2. Multi-tester/voltmeter
Essentially the most common utilization of multi-tester is testing energy supplies, which includes testing voltage, continuity, resistance, amongst many others; whereas, a voltmeter is utilised to measure only voltage.
3. ATX energy provide tester
This is among the most indispensable instruments for computer repair that specifies when the energy provide is outputting power; while offering purposeful terminals that allow straightforward testing of the voltage employing a multi-tester/voltmeter.
four. Cable testers
Cable testers, utilized with a personal computer saves time and are simply manageable. Even though there are alternative approaches like substituting cables (for testing) with good ‘acknowledged’ cables, cable testers is a must-have for just about any pc fix technician’s arsenal.
5. Article card
One of the most crucial resources for Pc restore, a publish card when plugged into an growth slot, exhibits a difficulty code on a tiny display; which can be employed to determine a difficulty. They’re not only reliable tools to make sure precision and particular diagnosis, but may also be outstanding timesavers.
six. Diagnostic software program
A must-have computer fix tool, this software program is utilised to diagnose any computer issues in minimal downtime. This diagnostic software is quickly offered both as disk drive set up software program utilities, that are downloadable or are supplied by the drive software producers – at zero expense.
seven. USB network adapter
A laptop or computer restore technician ought to have a USB network adapter in his took kit to facilitate straightforward network access on a pc which has USB ports, but is devoid of any inner network adapter.
eight. Information transfer cables
A computer fix technician is most frequently faced using the dilemma of corrupted OS during Computer restore. And the finest remedy is information transfer, where the tough generate is formatted and OS and other software are reinstalled. That is done by information transfer cables accessible in types such as USB, parallel and serial (null-modem).
nine. Port-testing software program & Loopback adapters
Although port-testing software is employed to determine proper functioning from the various ports; loopback adapters works in conjunction with the port-testing software. Accessible for serial and parallel ports, loopback adapters replicate signals which can be input into a laptop or computer.
10. Data-recovery software
A must-have for any laptop or computer restore technician’s toolkit; data recovery software can help recover information from damaged hard drives.
single} Pc Fix Technician Ought to Maintain in His Arsenal

http://www.articlealley.com/http://norbertandrews.articlealley.com/10-instruments-every-single-laptop-or-computer-repair-technician-should-maintain-in-his-arsenal-2365773.html

Can I get my money back?

Josh — Thu, 10 May 2012 07:00:23 +0000

hirschi15 Asked: Can I get my money back?

I am a senior in high school and new this year, I received the option to take a pharmacy technician course online for $250. I thought this would be a perfect job during college! So I signed up and at first, this program was awesome. I loved the material (I love anything medical related) and was learning it quick, overall I was happy with my purchase. After about half way through the school year, I received a letter from the state I live in that said that the program I am participating in does not meet their standards and has been disapproved of. This made me angry, because I had spent four months of hard work and study on things that I did not need to know to become a pharmacy technician! It is not my fault that the state didn't review the program before they made me buy it, I paid for a program that would teach me what I needed to know and that is not what I received. Is there any chance I can get that $250 back that I wasted on a disapproved program? How should I go about doing this :/

Answers:

Jenny Answered:
Unfortunately, no. You paid for the information they gave you. Just because you can't use the knowledge to get some kind of degree or certificate doesn't mean they owe you the money. They didn't make you buy it, you chose to buy it, and even though it doesn't meet the states requirements, you still got all the knowledge. There are all kinds of scams online like this.

But it can't hurt to ask for a refund, just don't be surprised if they don't give it to you.

Anonymous Answered:
uh, you are pretty naive to think that taking ONE CLASS (esp an online one) is going to land you a job… esp as a pharmacy technician.LOLColleges have this associates degree program and it takes YEARS to get through it. Not a single job out there (legit) can get you a job with ONE online class.
You are getting ahead of yourself…. People go to college to get a degree to be a pharmacy tech.When in college, people get jobs at fast food restaurants while they are at college to be pharmacy techs!Ha… getting a little ahead of yourself!

You get what you pay for and you are/should be responsible for researching and knowing what you are buying

iphone wizard Answered:
Prob no refund

Got a better answer? Share it below!

Incoming search terms:

how do i get my money back amir khan

I’ll Stand by You – Official Book Trailer

Josh — Thu, 10 May 2012 07:00:10 +0000

Fourteen years ago, Elissa Montanti was a lab technician in Staten Island. She had, in the span of only a few years, lost her beloved mother, grandmother, and high school sweetheart. Hoping to find a way past her own troubles and the depression and panic attacks that quietly crippled her, she decided to raise money for school supplies for the children of war-torn Bosnia. But at a meeting with the UN ambassador she learned that those children didn't need pencils. He showed her a photo of a boy who had lost both arms and one leg to a land mine; these children needed a lot more.

Tier 2 UK job Sponsorship PLEASE HELP?

Josh — Tue, 08 May 2012 19:00:21 +0000

Asked: Tier 2 UK job Sponsorship PLEASE HELP?

I want to get sponsored by a registered Tier 2 company in the UK, so that I may work and live in the UK.

I am a Canadian Citizen with a college diploma as Architectural Technician and I am currently working for an Engineering firm as Electrical CAD Technician. I have experience in Auto CAD, AutoCAD MEP, Revit, Revit MEP etc… I would Ideally like to work at an engineering or an Architectural firm in or around Hereford UK. I have been applying for so many jobs but as soon as they realize I need sponsorship in order to enter they refuse me.

Please if anyone knows of Engineering Firms or Architectural Firms that would be willing to take on a Canadian citizen and sponsor them I would be very grateful for any information you can give me.